General instructions:

1. Download and extract the drivers to a folder on your hard drive.
2. Start, printers
3. Add Printer, next
4. Local Printer attached . . .
5. Uncheck automatically detect . . ., next
6. Create new port, drop down list, Standard TCP/IP Port, next
7. Next
8. "Printer Name or IP Address" = ###.###.###.## (from above), next

9. If you get the error above it means that you already have that port created because it is the same port as the old HP4550. Click OK, Back, Cancel, Select the top Radio button that says "Use the following port", drop the list down and select the IP address that you entered before. Continue.
10. If it asks about the network card just go to next
11. Finish
12. Click on the "Have Disk" button, find the folder you unzipped to, select file.
13. Next through everything else . . .